Automatic Self Cleaning Filter
Self Cleaning Filter
Automatic Back Flushing Filter
Bag Filter Housing
Metal Edge Filter
Automatic Backwash Filter
Basket Filter Housing
Cartridge Filter Housing
Solid Liquid Separator
JetFlow Automatic Backwash Filters
Mr. GustovaLIVIC is our worth-trust partner and privide us reliable filtration support.
Mrs. ShurkoLIVIC provide us the proper filter for our painting filtration.
316L Automatic Backwash Strainer For Water Filtration To 3 Micron
|HOUSING WET PART MATERIAL||Carbon Steel/GRP/304/316L/Duplex SS 2205||FILTRATION DEGREE||From 3 To 300micron|
|APPLICABLE LIQUID||Raw Water， Fresh Water||FLOWRATE RANGE||From 5 To 1000m³/h|
|INLET & OUTLET SIZE||From DN50 To DN350||STANDARD DESIGN PRESSURE||10 Bar|
|Product Name||JetFlow Automatic Backwashing Filter||Usage||For Recycling Process Water Filtration|
Water Filtration Automatic Backwash Strainer,
316L Automatic Backwash Strainer,
Duplex SS 2205 Automatic Backwash Strainer
316L Automatic Backwash Strainer For Water Filtration to 3 micron
Automatic Backwashing Filters and Strainers are designed on the base of scanning automatic self-cleaning Filter. When the filter screen can not be regenerated only by back washing with inside suction nozzles, JetFlow® Automatic Backwash Filter adopts the augmented injection back-washing design with a high pressure (H.P. for short) pump to clean the filter screen completely. It is the ideal solution for the challenging service conditions such as high TSS liquid, ultra-fine filtration degree down to 5 μm, sticky debris and particles or low inlet pressure. JetFlow® Automatic Backwash Filter can efficiently remove the suspended solids, sediment and plankton from water or water-like liquid. It keeps efficient self-cleaning performance and continuously work with one single filter. Filtration process is not interrupted during back-flushing. Chemical class design of JetFlow® Automatic Backwash Filter is also available to meet the requirements such as high temperature, high pressure, explosion-proof, zero leakage, etc. JetFlow® Automatic Backwash Filters can meet the most demanding requirements.
The JetFlow® Automatic Backwash Filter can run in two modes.
1. All-time suction and injection back-flushing. Every self-cleaning cycle, the suction back-flushing and H.P. injection back-flushing work together.
2. Real-time suction and injection back-flushing. The H.P. injection reinforcing back-flushing steps in when the suction back-flushing interval is shorter than preset.
|Standard Design Pressure||0.6/1.0MPa (Depend on the Filter Model and Custom-made Requirement)|
|Mini. Working Pressure||30 kPa (Even Flowing by Gravity)|
|Flowrate Range||5~1000m³/h(Depends on the filtration degree and ppm)|
|Applicable Liquid||Water: Sea Water, Fresh Water, Other Raw Water
Processs Liquid: Amine, Methanol, Feed Oil, Fuel
|Back-flushing Liquid||Filtered Clean Water|
|Working Principle||Single Filter Continuous Filtration, Automatic Back-flushing|
|Design Temperature||0-120 ℃ (Standard Type) /0-300℃ (Chemical Class)|
|Back-flushing Cycle||Differential Pressure 50kPa and Time|
|Differential Pressure Instrument||Intelligent Differential Pressure Transmitter|
|Inlet and Outlet Size||DN50~DN350|
|Inlet and Outlet Standard||DIN Flange PN10 / ANSI Flange CLASS150|
|Housing Wet Part Material||CS/304/316L/Duplex SS 2205/GRP|
|Filter Screen Material||304/316L/904L/2507|
|Internal Parts Material||PTFE,POM,316L/2507|
|Carbon Steel Anticorrosion||Rilsan Coating/ Rubber Lining|
|Injection Cleaning Pump||Mult-stage Centrifugal H.P. Pump|
|Back-flushing Valve||Pneumatic Butterfly / Ball Valve|
|Facility Supply||380V AC,0.4-0.6MPa Clean and Dry Compressed Air|
|Custom-made Design||Explosion Proof Design Involving Instruments and the Control System
Designed and Manufactured per ASME / GB150 / PED Pressure Vessel Code
Zero-leakage Shaft Sealing Design for flammable, explosive and toxic chemical fluids